Named pipe for interprocess communication. More...

#include <Urho3D/IO/NamedPipe.h>

Inheritance diagram for Urho3D::NamedPipe:
[legend]
Collaboration diagram for Urho3D::NamedPipe:
[legend]

Public Member Functions

 NamedPipe (Context *context)
 Construct.
 
 NamedPipe (Context *context, const String &pipeName, bool isServer)
 Construct and open in either server or client mode.
 
 ~NamedPipe () override
 Destruct and close.
 
unsigned Read (void *dest, unsigned size) override
 Read bytes from the pipe without blocking if there is less data available. Return number of bytes actually read.
 
unsigned Seek (unsigned position) override
 Set position. No-op for pipes.
 
unsigned Write (const void *data, unsigned size) override
 Write bytes to the pipe. Return number of bytes actually written.
 
bool IsEof () const override
 Return whether pipe has no data available.
 
const StringGetName () const override
 Return the pipe name.
 
bool Open (const String &pipeName, bool isServer)
 Open the pipe in either server or client mode. If already open, the existing pipe is closed. For a client end to open successfully the server end must already to be open. Return true if successful.
 
void Close ()
 Close the pipe. Note that once a client has disconnected, the server needs to close and reopen the pipe so that another client can connect. At least on Windows this is not possible to detect automatically, so the communication protocol should include a "bye" message to handle this situation.
 
bool IsOpen () const
 
bool IsServer () const
 
- Public Member Functions inherited from Urho3D::Object
 Object (Context *context)
 Construct.
 
 ~Object () override
 Destruct. Clean up self from event sender & receiver structures.
 
virtual StringHash GetType () const =0
 
virtual const StringGetTypeName () const =0
 
virtual const TypeInfoGetTypeInfo () const =0
 Return type info.
 
virtual void OnEvent (Object *sender, StringHash eventType, VariantMap &eventData)
 Handle event.
 
bool IsInstanceOf (StringHash type) const
 Check current instance is type of specified type.
 
bool IsInstanceOf (const TypeInfo *typeInfo) const
 Check current instance is type of specified type.
 
template<typename T >
bool IsInstanceOf () const
 Check current instance is type of specified class.
 
template<typename T >
T * Cast ()
 Cast the object to specified most derived class.
 
template<typename T >
const T * Cast () const
 Cast the object to specified most derived class.
 
void SubscribeToEvent (StringHash eventType, EventHandler *handler)
 Subscribe to an event that can be sent by any sender.
 
void SubscribeToEvent (Object *sender, StringHash eventType, EventHandler *handler)
 Subscribe to a specific sender's event.
 
void SubscribeToEvent (StringHash eventType, const std::function< void(StringHash, VariantMap &)> &function, void *userData=nullptr)
 Subscribe to an event that can be sent by any sender.
 
void SubscribeToEvent (Object *sender, StringHash eventType, const std::function< void(StringHash, VariantMap &)> &function, void *userData=nullptr)
 Subscribe to a specific sender's event.
 
void UnsubscribeFromEvent (StringHash eventType)
 Unsubscribe from an event.
 
void UnsubscribeFromEvent (Object *sender, StringHash eventType)
 Unsubscribe from a specific sender's event.
 
void UnsubscribeFromEvents (Object *sender)
 Unsubscribe from a specific sender's events.
 
void UnsubscribeFromAllEvents ()
 Unsubscribe from all events.
 
void UnsubscribeFromAllEventsExcept (const PODVector< StringHash > &exceptions, bool onlyUserData)
 Unsubscribe from all events except those listed, and optionally only those with userdata (script registered events).
 
void SendEvent (StringHash eventType)
 Send event to all subscribers.
 
void SendEvent (StringHash eventType, VariantMap &eventData)
 Send event with parameters to all subscribers.
 
VariantMapGetEventDataMap () const
 Return a preallocated map for event data. Used for optimization to avoid constant re-allocation of event data maps.
 
template<typename... Args>
void SendEvent (StringHash eventType, Args... args)
 Send event with variadic parameter pairs to all subscribers. The parameter pairs is a list of paramID and paramValue separated by comma, one pair after another.
 
ContextGetContext () const
 Return execution context.
 
const VariantGetGlobalVar (StringHash key) const
 
const VariantMapGetGlobalVars () const
 
void SetGlobalVar (StringHash key, const Variant &value)
 
ObjectGetSubsystem (StringHash type) const
 Return subsystem by type.
 
ObjectGetEventSender () const
 Return active event sender. Null outside event handling.
 
EventHandlerGetEventHandler () const
 Return active event handler. Null outside event handling.
 
bool HasSubscribedToEvent (StringHash eventType) const
 Return whether has subscribed to an event without specific sender.
 
bool HasSubscribedToEvent (Object *sender, StringHash eventType) const
 Return whether has subscribed to a specific sender's event.
 
bool HasEventHandlers () const
 Return whether has subscribed to any event.
 
template<class T >
T * GetSubsystem () const
 Template version of returning a subsystem.
 
const StringGetCategory () const
 
void SetBlockEvents (bool block)
 Block object from sending and receiving events.
 
bool GetBlockEvents () const
 Return sending and receiving events blocking status.
 
- Public Member Functions inherited from Urho3D::RefCounted
 RefCounted ()
 Construct. Allocate the reference count structure and set an initial self weak reference.
 
virtual ~RefCounted ()
 Destruct. Mark as expired and also delete the reference count structure if no outside weak references exist.
 
 RefCounted (const RefCounted &rhs)=delete
 Prevent copy construction.
 
RefCountedoperator= (const RefCounted &rhs)=delete
 Prevent assignment.
 
void AddRef ()
 Increment reference count. Can also be called outside of a SharedPtr for traditional reference counting.
 
void ReleaseRef ()
 Decrement reference count and delete self if no more references. Can also be called outside of a SharedPtr for traditional reference counting.
 
int Refs () const
 
int WeakRefs () const
 
RefCountRefCountPtr ()
 Return pointer to the reference count structure.
 
- Public Member Functions inherited from Urho3D::AbstractFile
 AbstractFile ()
 Construct.
 
 AbstractFile (unsigned int size)
 Construct.
 
 ~AbstractFile () override=default
 Destruct.
 
- Public Member Functions inherited from Urho3D::Deserializer
 Deserializer ()
 Construct with zero size.
 
 Deserializer (unsigned size)
 Construct with defined size.
 
virtual ~Deserializer ()
 Destruct.
 
virtual unsigned GetChecksum ()
 
unsigned SeekRelative (int delta)
 Set position relative to current position. Return actual new position.
 
unsigned GetPosition () const
 
unsigned Tell () const
 Return current position.
 
unsigned GetSize () const
 
long long ReadInt64 ()
 Read a 64-bit integer.
 
int ReadInt ()
 Read a 32-bit integer.
 
short ReadShort ()
 Read a 16-bit integer.
 
signed char ReadByte ()
 Read an 8-bit integer.
 
unsigned long long ReadUInt64 ()
 Read a 64-bit unsigned integer.
 
unsigned ReadUInt ()
 Read a 32-bit unsigned integer.
 
unsigned short ReadUShort ()
 Read a 16-bit unsigned integer.
 
unsigned char ReadUByte ()
 Read an 8-bit unsigned integer.
 
bool ReadBool ()
 Read a bool.
 
float ReadFloat ()
 Read a float.
 
double ReadDouble ()
 Read a double.
 
IntRect ReadIntRect ()
 Read an IntRect.
 
IntVector2 ReadIntVector2 ()
 Read an IntVector2.
 
IntVector3 ReadIntVector3 ()
 Read an IntVector3.
 
Rect ReadRect ()
 Read a Rect.
 
Vector2 ReadVector2 ()
 Read a Vector2.
 
Vector3 ReadVector3 ()
 Read a Vector3.
 
Vector3 ReadPackedVector3 (float maxAbsCoord)
 Read a Vector3 packed into 3 x 16 bits with the specified maximum absolute range.
 
Vector4 ReadVector4 ()
 Read a Vector4.
 
Quaternion ReadQuaternion ()
 Read a quaternion.
 
Quaternion ReadPackedQuaternion ()
 Read a quaternion with each component packed in 16 bits.
 
Matrix3 ReadMatrix3 ()
 Read a Matrix3.
 
Matrix3x4 ReadMatrix3x4 ()
 Read a Matrix3x4.
 
Matrix4 ReadMatrix4 ()
 Read a Matrix4.
 
Color ReadColor ()
 Read a color.
 
BoundingBox ReadBoundingBox ()
 Read a bounding box.
 
String ReadString ()
 Read a null-terminated string.
 
String ReadFileID ()
 Read a four-letter file ID.
 
StringHash ReadStringHash ()
 Read a 32-bit StringHash.
 
PODVector< unsigned char > ReadBuffer ()
 Read a buffer with size encoded as VLE.
 
ResourceRef ReadResourceRef ()
 Read a resource reference.
 
ResourceRefList ReadResourceRefList ()
 Read a resource reference list.
 
Variant ReadVariant ()
 Read a variant.
 
Variant ReadVariant (VariantType type)
 Read a variant whose type is already known.
 
VariantVector ReadVariantVector ()
 Read a variant vector.
 
StringVector ReadStringVector ()
 Read a string vector.
 
VariantMap ReadVariantMap ()
 Read a variant map.
 
unsigned ReadVLE ()
 Read a variable-length encoded unsigned integer, which can use 29 bits maximum.
 
unsigned ReadNetID ()
 Read a 24-bit network object ID.
 
String ReadLine ()
 Read a text line.
 
- Public Member Functions inherited from Urho3D::Serializer
virtual ~Serializer ()
 Destruct.
 
bool WriteInt64 (long long value)
 Write a 64-bit integer.
 
bool WriteInt (int value)
 Write a 32-bit integer.
 
bool WriteShort (short value)
 Write a 16-bit integer.
 
bool WriteByte (signed char value)
 Write an 8-bit integer.
 
bool WriteUInt64 (unsigned long long value)
 Write a 64-bit unsigned integer.
 
bool WriteUInt (unsigned value)
 Write a 32-bit unsigned integer.
 
bool WriteUShort (unsigned short value)
 Write a 16-bit unsigned integer.
 
bool WriteUByte (unsigned char value)
 Write an 8-bit unsigned integer.
 
bool WriteBool (bool value)
 Write a bool.
 
bool WriteFloat (float value)
 Write a float.
 
bool WriteDouble (double value)
 Write a double.
 
bool WriteIntRect (const IntRect &value)
 Write an IntRect.
 
bool WriteIntVector2 (const IntVector2 &value)
 Write an IntVector2.
 
bool WriteIntVector3 (const IntVector3 &value)
 Write an IntVector3.
 
bool WriteRect (const Rect &value)
 Write a Rect.
 
bool WriteVector2 (const Vector2 &value)
 Write a Vector2.
 
bool WriteVector3 (const Vector3 &value)
 Write a Vector3.
 
bool WritePackedVector3 (const Vector3 &value, float maxAbsCoord)
 Write a Vector3 packed into 3 x 16 bits with the specified maximum absolute range.
 
bool WriteVector4 (const Vector4 &value)
 Write a Vector4.
 
bool WriteQuaternion (const Quaternion &value)
 Write a quaternion.
 
bool WritePackedQuaternion (const Quaternion &value)
 Write a quaternion with each component packed in 16 bits.
 
bool WriteMatrix3 (const Matrix3 &value)
 Write a Matrix3.
 
bool WriteMatrix3x4 (const Matrix3x4 &value)
 Write a Matrix3x4.
 
bool WriteMatrix4 (const Matrix4 &value)
 Write a Matrix4.
 
bool WriteColor (const Color &value)
 Write a color.
 
bool WriteBoundingBox (const BoundingBox &value)
 Write a bounding box.
 
bool WriteString (const String &value)
 Write a null-terminated string.
 
bool WriteFileID (const String &value)
 Write a four-letter file ID. If the string is not long enough, spaces will be appended.
 
bool WriteStringHash (const StringHash &value)
 Write a 32-bit StringHash.
 
bool WriteBuffer (const PODVector< unsigned char > &value)
 Write a buffer, with size encoded as VLE.
 
bool WriteResourceRef (const ResourceRef &value)
 Write a resource reference.
 
bool WriteResourceRefList (const ResourceRefList &value)
 Write a resource reference list.
 
bool WriteVariant (const Variant &value)
 Write a variant.
 
bool WriteVariantData (const Variant &value)
 Write a variant without the type information.
 
bool WriteVariantVector (const VariantVector &value)
 Write a variant vector.
 
bool WriteStringVector (const StringVector &value)
 Write a variant vector.
 
bool WriteVariantMap (const VariantMap &value)
 Write a variant map.
 
bool WriteVLE (unsigned value)
 Write a variable-length encoded unsigned integer, which can use 29 bits maximum.
 
bool WriteNetID (unsigned value)
 Write a 24-bit network object ID.
 
bool WriteLine (const String &value)
 Write a text line. Char codes 13 & 10 will be automatically appended.
 

Private Member Functions

 URHO3D_OBJECT (NamedPipe, Object)
 

Private Attributes

String pipeName_
 Pipe name.
 
bool isServer_
 Server mode flag.
 
int readHandle_
 Pipe handle.
 
int writeHandle_
 

Additional Inherited Members

- Static Public Member Functions inherited from Urho3D::Object
static const TypeInfoGetTypeInfoStatic ()
 Return type info static.
 
- Protected Attributes inherited from Urho3D::Object
Contextcontext_
 Execution context.
 
- Protected Attributes inherited from Urho3D::Deserializer
unsigned position_
 Stream position.
 
unsigned size_
 Stream size.
 

Detailed Description

Named pipe for interprocess communication.

Member Function Documentation

◆ IsOpen()

bool Urho3D::NamedPipe::IsOpen ( ) const

Return whether is open.

◆ IsServer()

bool Urho3D::NamedPipe::IsServer ( ) const
inline

Return whether is in server mode.


The documentation for this class was generated from the following files:
  • Source/Urho3D/IO/NamedPipe.h
  • Source/Urho3D/IO/NamedPipe.cpp