2D pulley constraint component. More...

#include <Urho3D/Urho2D/ConstraintPulley2D.h>

Inheritance diagram for Urho3D::ConstraintPulley2D:
[legend]
Collaboration diagram for Urho3D::ConstraintPulley2D:
[legend]

Public Member Functions

 ConstraintPulley2D (Context *context)
 Construct.
 
 ~ConstraintPulley2D () override
 Destruct.
 
void SetOwnerBodyGroundAnchor (const Vector2 &groundAnchor)
 
void SetOtherBodyGroundAnchor (const Vector2 &groundAnchor)
 
void SetOwnerBodyAnchor (const Vector2 &anchor)
 
void SetOtherBodyAnchor (const Vector2 &anchor)
 
void SetRatio (float ratio)
 
const Vector2GetOwnerBodyGroundAnchor () const
 
const Vector2GetOtherBodyGroundAnchor () const
 
const Vector2GetOwnerBodyAnchor () const
 
const Vector2GetOtherBodyAnchor () const
 
float GetRatio () const
 
- Public Member Functions inherited from Urho3D::Constraint2D
 Constraint2D (Context *context)
 Construct.
 
 ~Constraint2D () override
 Destruct.
 
void ApplyAttributes () override
 Apply attribute changes that can not be applied immediately. Called after scene load or a network update.
 
void OnSetEnabled () override
 Handle enabled/disabled state change.
 
void CreateJoint ()
 Create joint.
 
void ReleaseJoint ()
 Release joint.
 
void SetOtherBody (RigidBody2D *body)
 
void SetCollideConnected (bool collideConnected)
 
void SetAttachedConstraint (Constraint2D *constraint)
 Set attached constriant (for gear).
 
RigidBody2DGetOwnerBody () const
 
RigidBody2DGetOtherBody () const
 
bool GetCollideConnected () const
 
Constraint2DGetAttachedConstraint () const
 Return attached constraint (for gear).
 
b2Joint * GetJoint () const
 Return Box2D joint.
 
- Public Member Functions inherited from Urho3D::Component
 Component (Context *context)
 Construct.
 
 ~Component () override
 Destruct.
 
bool Save (Serializer &dest) const override
 Save as binary data. Return true if successful.
 
bool SaveXML (XMLElement &dest) const override
 Save as XML data. Return true if successful.
 
bool SaveJSON (JSONValue &dest) const override
 Save as JSON data. Return true if successful.
 
void MarkNetworkUpdate () override
 Mark for attribute check on the next network update.
 
virtual void GetDependencyNodes (PODVector< Node * > &dest)
 Return the depended on nodes to order network updates.
 
virtual void DrawDebugGeometry (DebugRenderer *debug, bool depthTest)
 Visualize the component as debug geometry.
 
void SetEnabled (bool enable)
 
void Remove ()
 Remove from the scene node. If no other shared pointer references exist, causes immediate deletion.
 
unsigned GetID () const
 
bool IsReplicated () const
 
NodeGetNode () const
 
SceneGetScene () const
 Return the scene the node belongs to.
 
bool IsEnabled () const
 
bool IsEnabledEffective () const
 
ComponentGetComponent (StringHash type) const
 Return component in the same scene node by type. If there are several, returns the first.
 
void GetComponents (PODVector< Component * > &dest, StringHash type) const
 Return components in the same scene node by type.
 
template<class T >
T * GetComponent () const
 Template version of returning a component in the same scene node by type.
 
template<class T >
void GetComponents (PODVector< T * > &dest) const
 Template version of returning components in the same scene node by type.
 
void AddReplicationState (ComponentReplicationState *state)
 Add a replication state that is tracking this component.
 
void PrepareNetworkUpdate ()
 Prepare network update by comparing attributes and marking replication states dirty as necessary.
 
void CleanupConnection (Connection *connection)
 Clean up all references to a network connection that is about to be removed.
 
- Public Member Functions inherited from Urho3D::Animatable
 Animatable (Context *context)
 Construct.
 
 ~Animatable () override
 Destruct.
 
bool LoadXML (const XMLElement &source) override
 Load from XML data. Return true if successful.
 
bool LoadJSON (const JSONValue &source) override
 Load from JSON data. Return true if successful.
 
void SetAnimationEnabled (bool enable)
 
void SetAnimationTime (float time)
 Set time position of all attribute animations or an object animation manually. Automatic update should be disabled in this case.
 
void SetObjectAnimation (ObjectAnimation *objectAnimation)
 
void SetAttributeAnimation (const String &name, ValueAnimation *attributeAnimation, WrapMode wrapMode=WM_LOOP, float speed=1.0f)
 Set attribute animation.
 
void SetAttributeAnimationWrapMode (const String &name, WrapMode wrapMode)
 Set attribute animation wrap mode.
 
void SetAttributeAnimationSpeed (const String &name, float speed)
 Set attribute animation speed.
 
void SetAttributeAnimationTime (const String &name, float time)
 Set attribute animation time position manually. Automatic update should be disabled in this case.
 
void RemoveObjectAnimation ()
 Remove object animation. Same as calling SetObjectAnimation with a null pointer.
 
void RemoveAttributeAnimation (const String &name)
 Remove attribute animation. Same as calling SetAttributeAnimation with a null pointer.
 
bool GetAnimationEnabled () const
 
ObjectAnimationGetObjectAnimation () const
 
ValueAnimationGetAttributeAnimation (const String &name) const
 Return attribute animation.
 
WrapMode GetAttributeAnimationWrapMode (const String &name) const
 Return attribute animation wrap mode.
 
float GetAttributeAnimationSpeed (const String &name) const
 Return attribute animation speed.
 
float GetAttributeAnimationTime (const String &name) const
 Return attribute animation time position.
 
void SetObjectAnimationAttr (const ResourceRef &value)
 Set object animation attribute.
 
ResourceRef GetObjectAnimationAttr () const
 Return object animation attribute.
 
- Public Member Functions inherited from Urho3D::Serializable
 Serializable (Context *context)
 Construct.
 
 ~Serializable () override
 Destruct.
 
virtual void OnSetAttribute (const AttributeInfo &attr, const Variant &src)
 Handle attribute write access. Default implementation writes to the variable at offset, or invokes the set accessor.
 
virtual void OnGetAttribute (const AttributeInfo &attr, Variant &dest) const
 Handle attribute read access. Default implementation reads the variable at offset, or invokes the get accessor.
 
virtual const Vector< AttributeInfo > * GetAttributes () const
 Return attribute descriptions, or null if none defined.
 
virtual const Vector< AttributeInfo > * GetNetworkAttributes () const
 Return network replication attribute descriptions, or null if none defined.
 
virtual bool Load (Deserializer &source)
 Load from binary data. Return true if successful.
 
virtual bool SaveDefaultAttributes () const
 Return whether should save default-valued attributes into XML. Default false.
 
bool SetAttribute (unsigned index, const Variant &value)
 
bool SetAttribute (const String &name, const Variant &value)
 Set attribute by name. Return true if successfully set.
 
void SetInstanceDefault (bool enable)
 Set instance-level default flag.
 
void ResetToDefault ()
 Reset all editable attributes to their default values.
 
void RemoveInstanceDefault ()
 Remove instance's default values if they are set previously.
 
void SetTemporary (bool enable)
 
void SetInterceptNetworkUpdate (const String &attributeName, bool enable)
 Enable interception of an attribute from network updates. Intercepted attributes are sent as events instead of applying directly. This can be used to implement client side prediction.
 
void AllocateNetworkState ()
 Allocate network attribute state.
 
void WriteInitialDeltaUpdate (Serializer &dest, unsigned char timeStamp)
 Write initial delta network update.
 
void WriteDeltaUpdate (Serializer &dest, const DirtyBits &attributeBits, unsigned char timeStamp)
 Write a delta network update according to dirty attribute bits.
 
void WriteLatestDataUpdate (Serializer &dest, unsigned char timeStamp)
 Write a latest data network update.
 
bool ReadDeltaUpdate (Deserializer &source)
 Read and apply a network delta update. Return true if attributes were changed.
 
bool ReadLatestDataUpdate (Deserializer &source)
 Read and apply a network latest data update. Return true if attributes were changed.
 
Variant GetAttribute (unsigned index) const
 
Variant GetAttribute (const String &name) const
 Return attribute value by name. Return empty if not found.
 
Variant GetAttributeDefault (unsigned index) const
 
Variant GetAttributeDefault (const String &name) const
 Return attribute default value by name. Return empty if not found.
 
unsigned GetNumAttributes () const
 
unsigned GetNumNetworkAttributes () const
 Return number of network replication attributes.
 
bool IsTemporary () const
 
bool GetInterceptNetworkUpdate (const String &attributeName) const
 Return whether an attribute's network updates are being intercepted.
 
NetworkStateGetNetworkState () const
 Return the network attribute state, if allocated.
 
- Public Member Functions inherited from Urho3D::Object
 Object (Context *context)
 Construct.
 
 ~Object () override
 Destruct. Clean up self from event sender & receiver structures.
 
virtual StringHash GetType () const =0
 
virtual const StringGetTypeName () const =0
 
virtual const TypeInfoGetTypeInfo () const =0
 Return type info.
 
virtual void OnEvent (Object *sender, StringHash eventType, VariantMap &eventData)
 Handle event.
 
bool IsInstanceOf (StringHash type) const
 Check current instance is type of specified type.
 
bool IsInstanceOf (const TypeInfo *typeInfo) const
 Check current instance is type of specified type.
 
template<typename T >
bool IsInstanceOf () const
 Check current instance is type of specified class.
 
template<typename T >
T * Cast ()
 Cast the object to specified most derived class.
 
template<typename T >
const T * Cast () const
 Cast the object to specified most derived class.
 
void SubscribeToEvent (StringHash eventType, EventHandler *handler)
 Subscribe to an event that can be sent by any sender.
 
void SubscribeToEvent (Object *sender, StringHash eventType, EventHandler *handler)
 Subscribe to a specific sender's event.
 
void SubscribeToEvent (StringHash eventType, const std::function< void(StringHash, VariantMap &)> &function, void *userData=nullptr)
 Subscribe to an event that can be sent by any sender.
 
void SubscribeToEvent (Object *sender, StringHash eventType, const std::function< void(StringHash, VariantMap &)> &function, void *userData=nullptr)
 Subscribe to a specific sender's event.
 
void UnsubscribeFromEvent (StringHash eventType)
 Unsubscribe from an event.
 
void UnsubscribeFromEvent (Object *sender, StringHash eventType)
 Unsubscribe from a specific sender's event.
 
void UnsubscribeFromEvents (Object *sender)
 Unsubscribe from a specific sender's events.
 
void UnsubscribeFromAllEvents ()
 Unsubscribe from all events.
 
void UnsubscribeFromAllEventsExcept (const PODVector< StringHash > &exceptions, bool onlyUserData)
 Unsubscribe from all events except those listed, and optionally only those with userdata (script registered events).
 
void SendEvent (StringHash eventType)
 Send event to all subscribers.
 
void SendEvent (StringHash eventType, VariantMap &eventData)
 Send event with parameters to all subscribers.
 
VariantMapGetEventDataMap () const
 Return a preallocated map for event data. Used for optimization to avoid constant re-allocation of event data maps.
 
template<typename... Args>
void SendEvent (StringHash eventType, Args... args)
 Send event with variadic parameter pairs to all subscribers. The parameter pairs is a list of paramID and paramValue separated by comma, one pair after another.
 
ContextGetContext () const
 Return execution context.
 
const VariantGetGlobalVar (StringHash key) const
 
const VariantMapGetGlobalVars () const
 
void SetGlobalVar (StringHash key, const Variant &value)
 
ObjectGetSubsystem (StringHash type) const
 Return subsystem by type.
 
ObjectGetEventSender () const
 Return active event sender. Null outside event handling.
 
EventHandlerGetEventHandler () const
 Return active event handler. Null outside event handling.
 
bool HasSubscribedToEvent (StringHash eventType) const
 Return whether has subscribed to an event without specific sender.
 
bool HasSubscribedToEvent (Object *sender, StringHash eventType) const
 Return whether has subscribed to a specific sender's event.
 
bool HasEventHandlers () const
 Return whether has subscribed to any event.
 
template<class T >
T * GetSubsystem () const
 Template version of returning a subsystem.
 
const StringGetCategory () const
 
void SetBlockEvents (bool block)
 Block object from sending and receiving events.
 
bool GetBlockEvents () const
 Return sending and receiving events blocking status.
 
- Public Member Functions inherited from Urho3D::RefCounted
 RefCounted ()
 Construct. Allocate the reference count structure and set an initial self weak reference.
 
virtual ~RefCounted ()
 Destruct. Mark as expired and also delete the reference count structure if no outside weak references exist.
 
 RefCounted (const RefCounted &rhs)=delete
 Prevent copy construction.
 
RefCountedoperator= (const RefCounted &rhs)=delete
 Prevent assignment.
 
void AddRef ()
 Increment reference count. Can also be called outside of a SharedPtr for traditional reference counting.
 
void ReleaseRef ()
 Decrement reference count and delete self if no more references. Can also be called outside of a SharedPtr for traditional reference counting.
 
int Refs () const
 
int WeakRefs () const
 
RefCountRefCountPtr ()
 Return pointer to the reference count structure.
 

Static Public Member Functions

static void RegisterObject (Context *context)
 Register object factory.
 
- Static Public Member Functions inherited from Urho3D::Constraint2D
static void RegisterObject (Context *context)
 Register object factory.
 
- Static Public Member Functions inherited from Urho3D::Animatable
static void RegisterObject (Context *context)
 Register object factory.
 
- Static Public Member Functions inherited from Urho3D::Object
static const TypeInfoGetTypeInfoStatic ()
 Return type info static.
 

Private Member Functions

 URHO3D_OBJECT (ConstraintPulley2D, Constraint2D)
 
b2JointDef * GetJointDef () override
 Return Joint def.
 

Private Attributes

b2PulleyJointDef jointDef_
 Box2D joint def.
 
Vector2 ownerBodyGroundAnchor_
 Owner body ground anchor.
 
Vector2 otherBodyGroundAnchor_
 Other body ground anchor.
 
Vector2 ownerBodyAnchor_
 Owner body anchor.
 
Vector2 otherBodyAnchor_
 Other body anchor.
 

Additional Inherited Members

- Protected Member Functions inherited from Urho3D::Constraint2D
void OnNodeSet (Node *node) override
 Handle node being assigned.
 
void OnSceneSet (Scene *scene) override
 Handle scene being assigned.
 
void RecreateJoint ()
 Recreate joint.
 
void InitializeJointDef (b2JointDef *jointDef)
 Initialize joint def.
 
void MarkOtherBodyNodeIDDirty ()
 Mark other body node ID dirty.
 
- Protected Member Functions inherited from Urho3D::Component
void OnAttributeAnimationAdded () override
 Handle attribute animation added.
 
void OnAttributeAnimationRemoved () override
 Handle attribute animation removed.
 
virtual void OnMarkedDirty (Node *node)
 Handle scene node transform dirtied.
 
virtual void OnNodeSetEnabled (Node *node)
 Handle scene node enabled status changing.
 
void SetID (unsigned id)
 
void SetNode (Node *node)
 Set scene node. Called by Node when creating the component.
 
void HandleAttributeAnimationUpdate (StringHash eventType, VariantMap &eventData)
 Handle scene attribute animation update event.
 
ComponentGetFixedUpdateSource ()
 Return a component from the scene root that sends out fixed update events (either PhysicsWorld or PhysicsWorld2D). Return null if neither exists.
 
void DoAutoRemove (AutoRemoveMode mode)
 Perform autoremove. Called by subclasses. Caller should keep a weak pointer to itself to check whether was actually removed, and return immediately without further member operations in that case.
 
- Protected Member Functions inherited from Urho3D::Animatable
virtual AnimatableFindAttributeAnimationTarget (const String &name, String &outName)
 Find target of an attribute animation from object hierarchy by name.
 
void SetObjectAttributeAnimation (const String &name, ValueAnimation *attributeAnimation, WrapMode wrapMode, float speed)
 Set object attribute animation internal.
 
void OnObjectAnimationAdded (ObjectAnimation *objectAnimation)
 Handle object animation added.
 
void OnObjectAnimationRemoved (ObjectAnimation *objectAnimation)
 Handle object animation removed.
 
void UpdateAttributeAnimations (float timeStep)
 Update attribute animations.
 
bool IsAnimatedNetworkAttribute (const AttributeInfo &attrInfo) const
 Is animated network attribute.
 
AttributeAnimationInfoGetAttributeAnimationInfo (const String &name) const
 Return attribute animation info.
 
void HandleAttributeAnimationAdded (StringHash eventType, VariantMap &eventData)
 Handle attribute animation added.
 
void HandleAttributeAnimationRemoved (StringHash eventType, VariantMap &eventData)
 Handle attribute animation removed.
 
- Protected Attributes inherited from Urho3D::Constraint2D
WeakPtr< PhysicsWorld2DphysicsWorld_
 Physics world.
 
b2Joint * joint_ {}
 Box2D joint.
 
WeakPtr< RigidBody2DownerBody_
 Owner body.
 
WeakPtr< RigidBody2DotherBody_
 Other body.
 
unsigned otherBodyNodeID_ {}
 Other body node ID for serialization.
 
bool collideConnected_ {}
 Collide connected flag.
 
bool otherBodyNodeIDDirty_ {}
 Other body node ID dirty flag.
 
WeakPtr< Constraint2DattachedConstraint_
 Attached constraint.
 
- Protected Attributes inherited from Urho3D::Component
Nodenode_
 Scene node.
 
unsigned id_
 Unique ID within the scene.
 
bool networkUpdate_
 Network update queued flag.
 
bool enabled_
 Enabled flag.
 
- Protected Attributes inherited from Urho3D::Animatable
bool animationEnabled_
 Animation enabled.
 
SharedPtr< ObjectAnimationobjectAnimation_
 Animation.
 
HashSet< const AttributeInfo * > animatedNetworkAttributes_
 Animated network attribute set.
 
HashMap< String, SharedPtr< AttributeAnimationInfo > > attributeAnimationInfos_
 Attribute animation infos.
 
- Protected Attributes inherited from Urho3D::Serializable
UniquePtr< NetworkStatenetworkState_
 Network attribute state.
 
- Protected Attributes inherited from Urho3D::Object
Contextcontext_
 Execution context.
 

Detailed Description

2D pulley constraint component.

Member Function Documentation

◆ GetOtherBodyAnchor()

const Vector2& Urho3D::ConstraintPulley2D::GetOtherBodyAnchor ( ) const
inline

Return other body anchor.

Here is the caller graph for this function:

◆ GetOtherBodyGroundAnchor()

const Vector2& Urho3D::ConstraintPulley2D::GetOtherBodyGroundAnchor ( ) const
inline

return other body ground anchor.

Here is the caller graph for this function:

◆ GetOwnerBodyAnchor()

const Vector2& Urho3D::ConstraintPulley2D::GetOwnerBodyAnchor ( ) const
inline

Return owner body anchor.

Here is the caller graph for this function:

◆ GetOwnerBodyGroundAnchor()

const Vector2& Urho3D::ConstraintPulley2D::GetOwnerBodyGroundAnchor ( ) const
inline

Return owner body ground anchor.

Here is the caller graph for this function:

◆ GetRatio()

float Urho3D::ConstraintPulley2D::GetRatio ( ) const
inline

Return ratio.

Here is the caller graph for this function:

◆ SetOtherBodyAnchor()

void Urho3D::ConstraintPulley2D::SetOtherBodyAnchor ( const Vector2 anchor)

Set other body anchor point.

Here is the call graph for this function:
Here is the caller graph for this function:

◆ SetOtherBodyGroundAnchor()

void Urho3D::ConstraintPulley2D::SetOtherBodyGroundAnchor ( const Vector2 groundAnchor)

Set other body ground anchor point.

Here is the call graph for this function:
Here is the caller graph for this function:

◆ SetOwnerBodyAnchor()

void Urho3D::ConstraintPulley2D::SetOwnerBodyAnchor ( const Vector2 anchor)

Set owner body anchor point.

Here is the call graph for this function:
Here is the caller graph for this function:

◆ SetOwnerBodyGroundAnchor()

void Urho3D::ConstraintPulley2D::SetOwnerBodyGroundAnchor ( const Vector2 groundAnchor)

Set other body ground anchor point.

Here is the call graph for this function:
Here is the caller graph for this function:

◆ SetRatio()

void Urho3D::ConstraintPulley2D::SetRatio ( float  ratio)

Set ratio.

Here is the call graph for this function:
Here is the caller graph for this function:

The documentation for this class was generated from the following files:
  • Source/Urho3D/Urho2D/ConstraintPulley2D.h
  • Source/Urho3D/Urho2D/ConstraintPulley2D.cpp